ABOUT NOVO
NEWS
CERTIFICATES
Home Search Print

SECURITY EQUIPMENT CATALOGUE
SONATA-AV 4B - VIBROACOUSTIC PROTECTION SYSTEM

The SONATA-AV 4 system is designed for protection of office rooms against leakage of audio information through acoustic and vibroacoustic channels.

The SONATA-AV 4 system generators of noise signals are built-in in each transducer.

The main design principal of the system - "one power supply source plus transducers-generators".

Wide frequency band of generated noise signal allows using the system for protection of highly classified information.

The SONATA-SA4B acoustic transducers, the SONATA-SV4B vibroacoustic transducers, which are part of the SONATA-AV 4 system, are electroacoustic transducers with the built-in generators of electric noise voltage and used for building protection systems against information leakage through acoustic and vibroacoustic channels.

Transducers allows changing system settings during system operation.
It is required, for example, for providing more comfortable conditions in a protected office room ("sound amplification turned on/off", "work with documents/meeting", etc.)
This function is available when using the SONATA-IP4.x power supply and control unit together with SONATA-DU4.1 remote control.

The SONATA-IP4.x power supply and control unit is used as a programmer for initial setting of transducers.
Maximum quantity of transducers can be limited by the characteristics of cable, which is used for connections.
The SONATA-IP4.1 and the SONATA-IP4.2 power supply and control units are part of the SONATA-AV 4 system and designed for:
  • Power supply and control of the SONATA-AV 4 system components, connected to the LOAD output.
  • Control of devises, used for protection against compromising emanations and connected to the LOAD output (SONATA-P3, SONATA-P3.1, SONATA-PS3).
  • Automatic system components monitoring.
  • Adjustment (setting of integral noise level, correcting spectra, etc.) of transducers and reading out service information from system components (operation time, error codes in case of failure, individual address, etc.).
SPECIFICATIONS:
MAIN SPECIFICATIONS SONATA-SA4B SONATA-SV4B
Generated frequencies band, Hz 175 ~ 11 200
Control interface Rebus 3 (three wire)
Quantity of octave bands of separate adjustment of noise levels 6
Quantity of steps of noise level adjustment in each octave band 8
Quantity of adjustment steps of noise integral levels 10
Consumption current (max. value), mA 30
Operational voltage, V, not less 10
Max. quantity of individual addresses 255
Continuous operational time, hours 8
Dimensions, mm, not more 4575120 =19 ø=47
Weight, kg, not more 0,168 0,042
Operational conditions:
- temperatures range, º
- relative humidity

5 ~40
Up to 80 % at +25 º


MAIN TECHNICAL CHARACTERISTICS OF THE POWER SUPPLY AND CONTROL UNITS
MODEL
SONATA-IP4.1
SONATA-IP4.2
Quantity of outputs for connection of loads 1
Quantity of "logically" controlled devices, pcs. 239, not less
Output voltage, V 12,5 0,5
Control interface ReBus-3 (three wire)
Load capacity, mA 1500, not less
Power consumption, W 40, not more
Power supply AC 220 V /50Hz
Indication type light, sound
Interface for PC USB 2.0
Remote access No Ethernet 10/100BaseT, RJ45, TCP/IPv4, static IP, DHCP client
Software for setting system components "Kamerton" special software
Software for remote monitoring of the system components No "Inspector"
Dimensions, mm 14260167, not more
Operational conditions:
-temperature
-relative humidity

+5 ~+40
Up to 80% at +25º


   


  Zoom in
  Zoom in
  Zoom in
  Zoom in



| - | | | | |

Copyright NOVO 2006 All rights reserved.
Designed by SeaDesign.ru


 


""